Beau Baron and David Haagsma team up for 2012, with newly formed Maxxis / H&M Motorsports race team!

Fallbrook CA 12/07/2011 – Roll Design is proud announce its continued support of two of the fastest racers in the Nation – Beau Baron and David Haagsma, for the 2012 race season!

2009 WORCS Pro Champion Beau Baron #549 has always proven himself a true Champion. Some bad luck in 2010 and 2011 kept him from retaining the #1 plate, but did not keep him off the Championship podium for either of those years, with a 2^nd and 3^rd respectively. It also did not keep him from remaining the likeable guy that everyone enjoys on, and off, the track. He always seems to have so much fun going fast, and his enjoyment of the sport relays well when you put a camera or microphone in front of him. Racing as a privateer against Factory teams is a tough undertaking and Beau continues to prove that he is one of the fastest guys that you could ever put on a quad.

2010 Pro-Am WORCS Champion #422 David Haagsma bumped up to the Pro class for 2011. He definitely proved himself worthy of the plate, with 6 – top 5 finishes and a 5^th place overall for the 2011 series and in doing so, he showed everyone that he will be a serious threat for the #1 plate for 2012.

Team Manager - Allan McCostlin of H&M Motorsports, will be the primary mechanic for Haagsma and Theo Lusardi will focus on Beau at the track. The motors for both riders will be built by Curtis Sparks. Sparks builds some of the most powerful 4-stroke engines available, and they last. Brutal endurance racing, like the WORCS series proves it. Haagsma showed just how much power Curtis is able to get out of them with a couple MONSTER holeshots this season, with the first being an uphill drag race on the start in Idaho.

The Maxxis / H&M Motorsports racers will continue to run the Roll Design/ Elka suspension combo on their Honda TRX450Rs, as it has proven time and time again to be one of the best performing setups available. Roll Design will continue to be the exclusive U.S. Elka Service center for ATV’s on the West Coast, and will be onsite for the entire 2012 WORCS series in support of Beau, David, and the rest of our customers - both Amateur and Pro.

Congratulations to the new team, and we look forward to a very exciting and competitive new season!

WORCS Round 9 - Speedworld, AZ

Yamaha's Dustin Nelson, riding his #94 Roll Design equipped YFZ450R, claimed his first WORCS victory at the final round of the 2011 WORCS series last weekend - just weeks after securing his fifth Pro 450 Production class championship in the Quad-X motocross racing series. Rains fed a muddy Arizona racecourse at Speedworld MX park, forcing many drenched riders to search for clean goggles within the first few turns of the race. Nelson exploded out of the gate during Sunday's Pro Main Event, taking the WORCS holeshot bonus cash and establishing a comfortable, roost-free gap for the lead, a gap that he would maintain for much of the race. In the end, Nelson finished nearly a half-minute ahead of the second place finisher.

At the end of the WORCS season, Roll Design riders numbered five of the top ten series finishers in the pro class, and six of the top ten series finishers in the Pro-Am class. Roll Design/MCR Honda rider, Beau Baron, finished third at the end of the year with five podium finishes in the nine race series. In the Pro-Am class, Roll Design's Keith Johnson also had five podium finishes for the year, finishing soundly in second place. Johnson also claimed first place in the Production A class series points championship.

Roll Design would like to thank all of the series champions and competitors that use Roll Design products. As an official representative and authorized service center of WORCS sponsor – Elka suspension, we will be looking forward to seeing you all again in 2012!

Roll Design Series Champions:

· Beau Baron - Pro ATV - 3rd place

· Keith Johnson - Production A - 1st place / Pro-Am - 2nd Place

· DJ Noerr - Production A - 2nd place

· Julie Russell - Womens A - 1st place

· Levi Shirley - 14-15 Production - 1st Place / School Boy 14-15 - 1st Place

· Alex Ortiz - 12-15 Production - 3rd Place / Shifter Open - 3rd Place / Shifter Open Sport - 3rd Place

· Matt Hancock - Sport 15-29 B - 3rd Place

· Jake Morton - School Boy - 3rd Place

· Lynn Prosser - Womens A - 3rd Place

· Reed Ribotta - 30+ C - 1st Place / Production C - 3rd Place

Eleven / Eleven / Eleven

Happy Veterans Day and thank you to all those that have, and are currently serving.

We are able to race and recreate because you have provided us freedoms not allowed in other countries.

Enjoy your day.

~Roll Design

FOUR OUT OF FIVE TOP QUAD-X PROS CHOOSE ROLL DESIGN / ELKA

Dustin Nelson Sweeps the 2011 Series and Claims Fifth Pro 450 Championship

Fallbrook CA 10/28/2011 – For Dustin Nelson, it was his eighth Quad-X win in a row and the end of his best season yet. This makes five Pro 450 Production class championships for the Roll Design/Elka Yamaha YFZ 450R rider. In the first moto, Nelson finished eight seconds ahead of the nearest competitor, then topped that with a twelve second lead in moto two. . “We have ridden at such a high level all year, and we have not had any mechanical issues. In fact, we have what I think is the best total package out there,” claimed Nelson.

Three other Roll Design riders finished out the top five positions in the series points championship. Beau Baron gave Nelson a run for his money, finishing in second place for the year on his Roll/MCR Honda 450R. David Haagsma is new to the pro class, but already looks to be riding like a veteran in both motocross and off-road disciplines. Haagsma finished fourth in points. Josh Row managed to stay in the top five, even after missing several motos due to an injured arm.

Building the best handling suspension system with the highest quality components, Roll Design wins championships! Roll Design builds its suspension packages to provide premium handling characteristics while minimizing rider fatigue. With the best championship record in the industry, just imagine what Roll Design can do for you out on the track and trail.

2011 Yamaha Quad X Points

Position - Rider - Points

1 - Dustin Nelson - 225

2 - Beau Baron - 186

4 - David Haagsma - 136

5 - Josh Row – Yamaha - 128

Roll Designs Dustin Nelson, Garrin Fuller, Levi Shirley all QuadX Champions!

Congratulations to Roll Design / Elka Pro Dustin Nelson for wrapping up his 4th QuadX Pro Championship and going undefeated for the overall in every round this year! Duncan Racings Garrin Fuller took home the #1 plate in the ProAm Championship and Duncan teammate Levi Shirley followed his lead taking the #1 plate in the intermediate class!

Congratulations guys!!

ROLL DESIGN/ELKA RIDERS BIG WEEKEND AT RACETOWN 395 Julie Russell Crowned Champ, Garrin Fuller Wins Pro-Am

Fallbrook CA 10/28/2011 – Make that THREE WORCS CHAMPIONSHIPS for Women's A rider, Julie Russell, who once again took a first place finish at Racetown 395. With one race still left in the series, Russell already has enough points to clinch the overall. On average, Russell turned a full minute faster lap time than anyone else in the Women's A class, and this is the second year in a row that Russell has claimed a WORCS championship. Russell is going out on top as she plans to retire from ATV racing after the final 2011 round at Speedworld MX in Arizona.

Beau Baron had to settle for a second place finish at Racetown after one of the fiercest Pro class battles WORCS fans have witnessed to date. Baron turned in the fastest lap time of the day at just over 9 minutes and 21 seconds. He lead early on in the race, then made use of an early fuel pit strategy. Can-Am racers, Josh Frederick and Jeremie Warnia, made the pass in the pits, with Baron hot on their tail. Baron caught Warnia while he was fueling, and then outmaneuvered Frederick on the logs in a very difficult Endurocross section of the racecourse. In the last laps, Baron got a little out of shape in the whoops, and was forced to concede the lead, and ultimately the win.

Pro Racer David Haagsma was got off to a great start and was running in the top five for all of his laps, but a rear brake mechanical failure sidelined his MCR Honda, forcing him to take a DNF.

The Pro-Am class packed a podium full of Roll/Elka Riders. Garrin Fuller is running in top form once again, claiming the class win. Chase Thomas and Keith Johnson also claimed familiar spots at the checkered flag, finishing second and third respectively.

Roll Design Riders Score BIG at WORCS Round 7

Glen Helen Pro Podium - Beau Baron 1st, Dustin Nelson 2nd!

Fallbrook CA 9/13/2011 – San Bernadino, CA - All eyes were on the front runners as WORCS round seven proved to be anything but predictable. After an hour and forty minutes of racing, it was Beau Baron that claimed the checkered flag at Glen Helen - his first WORCS win this season. "After I got into the lead, my work was not done and there was no time to relax because I could still see Warnia, Haagsma, Frederick and Nelson charging, and they were not going to let me breathe easily," remembered Baron. "This race has really tightened up the series points chase and makes the battle for the championship more exciting. I am going to do my best to prepare for the final two rounds, and no matter how it ends it is sure to be exciting." Baron currently sits just twelve points out of first place.

Dustin Nelson picked up second place, finishing just twelve seconds behind Baron. Nelson was riding with an injured right arm after an unfortunate incident during Saturday qualifying. "I had a pretty good crash in qualifying practice. It beat up my arm a little, but I was still able to qualify in third position," said Nelson. Nelson fought injury related arm pump during the first half of Sunday's Pro Main. "After my pit stop, I was running in fourth position. There was a pro-am rider down, and he was blocking the pro downhill. The top six or seven pros were all lined up waiting. When the track cleared we all raced hard. I passed Frederick when he pitted, and on the last lap made my way past Haagsma for 2nd."

It's his rookie season as a pro WORCS racer, but David Haagsma has already staked his place loudly at the top of the pack. At Glen Helen, Haagsma nabbed his second holeshot in the Pro class this season on his Roll Design / Elka / MCR / H&M Motorsports Honda, finishing on the leader's minute and just eleven seconds away from the third podium spot.

Pro Race: 1st, Beau Baron; 2nd, Dustin Nelson; 4th David Haagsma

In the Pro-Am class, Roll Design riders also dominated the finisher podium with Chase Thomas picking up a second place finish and Keith Johnson taking third. Garrin Fuller managed a fourth place finish.

Pro-Am Race: 2nd, Chase Thomas; 3rd, Keith Johnson; 4th Garrin Fuller

Two races remain in the WORCS series -
Race Town 395 - Adelanto, CA - October 21-23
Speedworld MX - Surprise, AZ - November 11-13

About ROLL DESIGN

Roll Design manufacturers high-end suspension and handling components for ATV’s. Doug Roll started the company in 1988 with the idea to build the best ATV off-road racing suspensions on the market. After 22 years, Roll Design control arms and steering shafts have won more off-road races, in the toughest conditions such as the Baja and Dakar than any other ATV suspension manufacturer in existence. Roll Design products are 100% made in the USA in Fallbrook, CA with the highest quality standards and components available in the industry. Roll Design is also a USA Factory Authorized Service Center for Elka Suspension.

www.rolldesign.com
www.elkaservicecenter.com
760-731-5920

A Lap With: Garrin Fuller

Reed Ribotta takes Silver at 2011 World Police and Fire Games!

We are expecting more details about the event, as well as pictures, when he returns from the East Coast... but wanted to get this out quickly as Reed pulled off an outstanding finish against racers from all over the world taking 2nd in the Open ATV Motocross event at the 2011 World Police and Fire Games in NY. If you have been following, we have been working with Reed on his LT-R since the 2010 season with new Roll Design arms and Elka Stage 4 shocks. Great job, and looking forward to the race report.

Meanwhile, if you have an LT-R that you are just not satisfied with, give us a call. We can help you get it working right. 760-731-5920

Save the Oregon Dunes!

Everyone, please take a minute to sign this.

http://www.thepetitionsite.com/3/stop-the-forest-service-from-endangering-or-dunes-atv-riding/

Roll Design Dominates Rounds 5&6 Quad X Pro Podium

Fallbrook CA 7/14/2011 –Dustin Nelson (#94) overalls both Rounds 5 & 6 in the Quad X series held at Glen Helen Raceway. Beau Baron (#549) breaks Nelson’s Moto win streak with 1^st Moto win of the season.

Round #5 and #6 of the Quad X series was held at the famous Glen Helen Raceway July 9^th and 10^th in Devore, California. The Glen Helen racetrack is one of the roughest and toughest tracks on the west coast. Known for its treacherous square edge holes, sandy soil, acceleration and deceleration bumps, and huge jumps; suspension setup is key to winning at the Glen.

Round 5 – Dustin Nelson and Beau Baron would continue their 2011 QuadX battle for the top 2 spots throughout the weekend. In Moto 1 on Saturday, Baron grabbed the holeshot and never looked back, to take his first Quad X moto win of the season. With this win, Beau would break the streak of Nelson’s undefeated Moto wins through the first 4 rounds of the Quad X series this year. Moto 2 would once again play out with Baron and Nelson once again banging bars early on. Dustin Nelson grabbed the win and the Overall for round 5 on Saturday with a 2-1 finish to make it 5 for 5 overall wins for the season so far. Roll Design / Elka dominated the podium at round 5 with Nelsons Yamaha teammate Josh Row in the 3rd place spot overall with a 5-3 overall. Garrin Fuller also took 1^st in the Pro Am class.

Round 6 - The double header weekend continued on Sunday for Round 6. Dustin Nelson’s and Beau Baron would once again put a show on for the fans as the top ran an all out Moto 1 and Moto 2 as if they were the only 2 riders on the track. Nelson took Moto 1 without question and Moto 2 saw Baron grab his second holeshot for the weekend. Nelson found an opening right away and took advantage of it, to once again put in a perfect 2 Motos with a 1-1 win taking the overall for Round 6, while Baron went 2-2 claiming the second spot. Sunday it was Barons Teammate MCR/Roll Design/Elka rider David Haagsma who was 3^rd fastest for the 3^rd spot on the podium with a 3-3 finish and Josh Row was consistently fast all weekend and taking 4^th on Sunday with a 4-4 for the motos. This gives Roll Design and Elka the entire Pro podium for the entire double header weekend, not to forget Duncan Racings Garrin Fuller also continued his hold on the top spot in the Pro-Am division, giving him top billing for the Pro Am racers all weekend.

The Roll Design / Elka combo once again displayed its superior quality and stability in one of the roughest tracks in the west coast [Glen Helen Raceway]. The top spots for both Round 5 and 6 of the Yamaha Quad X in the Pro and Pro – Am Classes were equipped with Roll Design A-Arms, Steering components and Elka Shocks.

Round 5 Pro Results (Top 5)

*1st	#94	DUSTIN NELSON - YAM EL CAJON, CA	2nd	1st	25
*2nd	#549	BEAU BARON - HON ATASCADEIO, CA	1st	2nd	22
*3rd	#3	JOSH ROW - YAM EL CAJON, CA	5th	3rd	20
4th	#62	JEREMIE WARNIA - CAA LAKE ELSINORE, CA	3rd	5th	19
5th	#143	DIRKIE BAARD - HON EL CAJON,	4th	6th	18

Round 6 Pro Results (Top 5)

*1st	#94	DUSTIN NELSON - YAM EL CAJON, CA	1st	1st	25
*2nd	#549	BEAU BARON - HON ATASCADEIO, CA	2nd	2nd	22
* 3rd	#422	DAVID HAAGSMA - HON BAKERSFIELD,	3rd	3rd	20
*4th	#3	JOSH ROW - YAM EL CAJON, CA	4th	4th	19
5th	#42	JUSTIN JONES - HON JBC, CA	7th	5th	18

*Denotes Riders equipped with Roll Design / Elka Shock setup

About ROLL DESIGN Roll Design manufacturers high-end suspensionand handling components for ATV’s. Doug Roll started the company in 1988 with the idea to build the best ATV off-road racing suspensions on the market. After 22 years, Roll Design control arms and steering shafts have won more off-road races, in the toughest conditions such as the Baja and Dakar than any other ATV suspension manufacturer in existence. Roll Design products are 100% made in the USA in Fallbrook, CA with the highest quality standards and components available in the industry. Roll Design is also a USA Factory Authorized Service Center for Elka Suspension.

www.rolldesign.com

www.elkaservicecenter.com

760-731-5920

"A lap with Hancock Racing"

"A lap with Hancock Racing"

Roll Design Sweeps Pro podium at QuadX round #4!

Pro Class results

1. Dustin Nelson
2. David Haagsma
3. Josh Row

Complete writeup can be found at ATVRiders.com

WORCS and SCORE

With the Tecate SCORE Baja 500 happening the same weekend as Rd #5 WORCS series we have decided to split it up and be representative at both events. Doug Roll will be in Mexico supporting the off-road efforts of the Elka riders, and Erik Westergaard will be at the Clay Peaks WORCS event in Payette, ID. We will NOT have the trailer at the WORCS race for this round but we will be pitting out of the Hancock Racing Pro-ATV rig, and will have one of our Elka EZ-Ups to help easily locate us. We will have some limited capabilities and parts so we will be offering emergency repair services, and setup... but will NOT be servicing shocks for this round so if you need them done, please get them in now.

.

Beau Baron ride school!

In case you have not yet seen this...



Beau Baron is offering a quad clinic Saturday August 13th and Sunday August 14th. Class size is limited to 10 people, so register soon! The form will disappear when the class has filled. Details will be e-mailed to registered participants, so make sure that your registration is correct before submitting it.

Class is $175 and will take place at a private track near Olympia, WA. Payment is due by July 10th.

Pro riding instruction from one of the best guys in the business! Questions can be e-mailed to Megan@pittraffic.com

link to registration form - http://pittraffic.com/mag/archives/951

Be sure to like Beau on FB - https://www.facebook.com/BeauBaron and if you miss this one, let him know on FB and hopefully he will open up more!

"A lap with" Jarrod McClure

Revolt Powersports has been working on some video footage for us at the WORCS races, this past weekend had Yokley Racings Jarrod McClure piloting the onboard video cameras. Enjoy.

Hancock Racing / Pro-ATV team produce results!

This past weekend was Rd. #3 and #4 of the Whiplash AZ Cup.

The Hancock Racing / Pro-Atv race team of Matt Hancock and Josh Edwards both run Roll Design products including steering shafts and arms with Elka Stage 4 shocks and consistently pull in great results.

Josh ran the Open Pro class and took 2nd on Saturday and 1st on Sunday. Matt won the Open Expert class both days!

Nice job guys, looking forward to seeing you in a couple weeks at Rd 3 of WORCS in Havasu!

Roll Design Amateurs Hit Jackpot at WORCS Round 2

Fallbrook CA 3/4/2011 – Amateur riders equipped with Roll Design/Elka Suspension Win Big at the WORCS Round 2 held at Buffalo Bills Casino in Primm, Nevada.

WORCS round #2 greeted rider’s with wintery weather conditions as temperatures in the low 30’s for Saturday’s events. Rain, Sleet and even

some snow fell during the day, but it wasn’t the weather that presented the biggest challenge for the day, it was the sandy whooped out race course. Primm valley is well known for its brutal desert conditions, but at the end of the day it was those who came prepared and setup to run in these harsh environments that would go home happy.

Roll Design as well as the Elka Service Center was trackside once again to help riders make the necessary adjustments for the days riding conditions. Riders in any class could get help with adjustments. Years of experience trackside from

Doug Roll and Erik Westergaard were like hitting the jackpot for the day’s events.

The Pro-Am class was dominated by Javier Robles Jr, of Mexicali BC. Robles would get a great start and after the first lap would get himself into the second position, pressuring the second place spot for the next several laps, Robles eventually got around #39 Collins Webster during the 5th Lap, where is keep the lead all the way to the checker flag.

Duncan Racing’s Garren Fuller put in the fastest lap time of 10:46:359 in the Open A class, grabbing the holeshot, and leading the entire race to take home the 1st Place trophy and the series points lead.

In The Women’s A class, Julie Russell of Team MCR aboard her Roll Design/Elka Shocks equipped Honda TRX450R put in a spectacular ride for the day. Julie Lead from start to finish and captured the fastest lap time of 10:36:017, followed by Raustyn Hurst in the second spot also equipped with Roll Design A-Arms.

The Hancock Racing team is familiar with the podium in the AZ Whiplash series races and grabbed 2 more wins in WORCS with Josh Edwards taking the 15-29 A and Matt Hancock in Sport 15-29 B.

The 12-15 Production class couldn't touch Jake Morton on his Roll Design / Elka equipped Yamaha Raptor 250 as he put himself on the top of the podium and is currently leading the series points.

Primm Nevada maybe a gambling town, but with Roll Design and Elka Suspension on your bike, the deck was stacked in your favor. WORCS Round #3 goes to Lake Havasu City Arizona on March 18-21st at Crazy Horse Campgrounds. Be sure you’re ready for the brutal course Havasu has to offer each year.

Roll Design top amateur results - WORCS Rd2 Primm

Pro Am - 1 - Javier Robles Jr - Roll Design/Elka

Open A - 1 - Garrin Fuller – Roll Design/Elka

Womens A - 1 -Julie Russell - Roll Design/Elka

2 - Raustyn Hurst – Roll Design

Sport 15-29 A - 1 - Josh Edwards – Roll Design/Elka

Sport 15-29 B - 1 - Matt Hancock – Roll Design/Elka

12-15 Production - 1 - Jake Morton – Roll Design/Elka

14-15 production - 1 - Levi Shirley – Roll Design/Elka

Current season standings

Production A - 1 - Keith Johnson

2 - DJ Noerr

Open A 1 - Garrin Fuller

Womens A 1 - Julie Russell

1 - Raustyn Hurst

12-15 Prod 1 - Jake Morton

30+ C 1 - Reed Ribotta

Complete results at www.worcsracing.com

About ROLL DESIGN

Roll Design manufacturers high-end suspension and handling components for ATV’s. Doug Roll started the company in 1988 with the idea to build the best ATV off-road racing suspensions on the market. After 22 years, Roll Design control arms and steering shafts have won more off-road races, in the toughest conditions such as the Baja and Dakar than any other ATV suspension manufacturer in existence. Roll Design products are 100% made in the USA in Fallbrook, CA with the highest quality standards and components available in the industry. Roll Design is also a USA Factory Authorized Service Center for Elka Suspension.

www.rolldesign.com

www.elkaservicecenter.com

760-731-5920

Roll Design Beau Baron wins iconic Adelanto GP in the ATV Expert Class.

Fallbrook CA 2/15/2011 – Beau Baron wins the iconic Adelanto GP in the ATV Expert Class.

Roll Design dominates Adelanto GP with 4 Top 5 finishes.

Racetown 395, in collaboration with Off Road Sports, announced in late December it would take over the 30-year motorsport event, after the former organizers last year said they could no longer run the race amid budget issues. However, after an agreement with the city of Adelanto the race was back on for 2011. Off Road Sports, LLC management set out to put more structure and safety built into the Adelanto GP racing. The goal make the event fun for everyone while preserving the overall feel of races past, FAST and FUN.

Saturday would host the motorcycles finishing up during the Sunday morning races, where Sunday afternoon hosted the ATV’s and UTV’s. The ATV Expert field had a very familiar feel, as many of the WORCS regulars were present for the afternoon’s race with 14 entries on the start.

Beau Baron, Roll Design/Elka/MCR rider fresh off his win from the Taft Big 6 in the ATV Expert class entered the Expert ATV class, as well as running his dirtbike in the 30+ class in Saturday’s race. Saturday’s race would give Beau an advantage over the rest of the field giving him a look at the rough sandy rutted conditions the desert landscape of Adelanto, CA would create for the off-road racing sections of the course.

“Saturday’s dirtbike race was kind of uneventful, I got the holeshot and that was the end of that.” – Beau exclaimed after his win in the 30+ Dirtbike Class.

The ATV Expert race on Sunday included many of the WORCS series racers. Beau would be joined by his Roll Design/Elka/MCR teammate Davi Haagsma, who would take the early lead getting the holeshot for the iconic Adelanto GP. Beau would waste no time getting around his teammate, passing him quickly within the first few turns.

Can-Am’s Jeremie Warnia, winner of the WORCS round #1, displayed the horsepower of the DS450 passing both Haagsma and Baron in a straight away during the early part of the race. Warnia’s lead was short lived, as he came up short on the pond jump, landing in the water, handing the lead back to Baron. Baron got in and out of the pits smoothly keeping his lead giving him the win for the 2011 Adelanto GP.

“ I took the lead back and just kept charging to get as far away from Warnia as I could”- Beau Baron

Roll Design/Elka/MCR Teammate Davi Haagsma made a strategic decision to not pit as an intense battle erupted with east coast’s Jarrod McClure Roll Design/Yokley/Costal Racing. The decision did not play out as expected and McClure would finish on the box in the 3^rd position. Haagsma settled for fourth followed by Mike Cafro, Roll Design/Elka/MCR teammate in the fifth spot.

ATV Expert Results from Adelanto GP

Place	Number	Name
1	1282	*Beau Baron
2	1768	Jeremie Warnia
3	1770	*Jarrod McClure
4	1634	*Davi Haagsma
5	1636	*Mike Cafro
6	1258	Jeremy Gray
7	1637	*Danny Prather
8	1635	*Chase Thomas
9	1128	John Rikerd
10	1419	Franciso Ruano

*Indicates Roll Design equipped Riders

About ROLL DESIGN

Roll Design manufacturers high-end suspension and handling components for ATV’s. Doug Roll started the company in 1988 with the idea to build the best ATV off-road racing suspensions on the market. After 22 years, Roll Design control arms and steering shafts have won more off-road races, in the toughest conditions such as the Baja and Dakar than any other ATV suspension manufacturer in existence. Roll Design products are 100% made in the USA in Fallbrook, CA with the highest quality standards and components available in the industry. Roll Design is also a USA Factory Authorized Service Center for Elka Suspension.

www.rolldesign.com

www.elkaservicecenter.com

760-731-5920